Where Are We Today
" The Ridge"
Priceville Ontario
Finally at long last, here is my post
on the "The Hangar/ shed that I built for doing my hobby in.
 |
| The Beginning |
This project started about a year ago
with the building of a shed 8 ft. X 16 ft., the inside being 8 x 12 with a 4 x
8 porch. Mike, a friend who is a contractor offered to get the material at his
cost and then build it with me and any volunteers on his own time on
weekends. Volunteers included my brother - in - law Gerry and our good buddy Rob.
I also built my work table before we went south for the winter.
 |
| Wiring and Insulation Done |
Returning home this spring, the goal
was to finish the inside by wiring, insulating and dry walling. Not wanting to
tape and mud the drywall, I used trim to cover all the seams. Paint colors were
chosen, and the painting was done.
 |
| Looking through the double doors |
 |
| Looking in at the bench with the big screen TV |
 |
| Looking in at the single door |
 |
| Inside view, bench with tv, cupboards and organized chaos |
 |
| Wall with the double doors, notice the peg boards from Bob |
With that done, the removal of a bench in the cargo trailer took place and was installed in "The Hangar", allowing the installation of tools, pictures, some mementos, equipment and building materials.
 |
| Looking at the single door end, more peg boards, drill press, picture on the wall |
I say that "The Hangar" is complete, but there is a little painting to do and some curtains for the windows, that Patsy will make for me. Since it's completion, I have been busy working at my hobby, building RC airplanes. The current project, 15 foot Telemaster, is coming along nicely, I hope to have it finished soon. So stay tuned for a post on it.
Thanks for dropping in, I enjoy reading your comments, if you care to leave one. Until the next time, take care.